|
|
DC8
Chop saw leg...needs work. I'll need to build a shroud for better capture performance.
Date: 12/21/2010
Views: 242
|
|
DC9
Date: 12/21/2010
Views: 195
|
|
DC11
I'm making these brackets out of scrap plywood lying around. I originally thought I'd need to screw/zip-tie the tabs at the bottom, but I found it not necessary.
Date: 12/21/2010
Views: 243
|
|
|
DC1
The first run out of the cyclone is a full 10' length.
Date: 12/21/2010
Views: 296
|
|
DC2
The TS still needs the extension table built. I ordered a Vega fence that is still on its way.
Date: 12/21/2010
Views: 263
|
|
DC3
Date: 12/21/2010
Views: 246
|
|
|
DC4
The wood on the walls was reclaimed from the ceiling of the garage I tore down to build my shop.
Date: 12/21/2010
Views: 280
|
|
DC7
This is a view from the door to the shop. The door leads to a 2.5 car garage.
Date: 12/21/2010
Views: 267
|
|
DC6
Here's the closet for the CV. Leaving it unsheetrocked for sound absorption. I plan on adding a hefty shelf above the urinal for an air compressor
Date: 12/21/2010
Views: 383
|
